Does anyone know if they will fit without any unreasonable modifications required? Thanks.

When you have opened your brake system and you are trying to bleed system back up to pressure, and you have air in your brake system, but where ? The air pocket is between the two cups on the Master Cylinder Piston, here. To get this pumping you need to fill this void between these two cups...

Using a Quadlock Fork Steam Pro Mount on my Yamaha R7...I wanted the same, at the same place for my daughter's R3...And no way to have the ram ball mount. So if it can give some ideas, here is my solution: Drill and make threads in the original bolt to fix the modified Quadlock !!

Hello guys does anybody else have the same problem when you connect to the ECU with OBD. since a month ago I changed my engine oil from 20-50 to 10-40 and my r3has been giving problems with power loss. my r3 also dies on idle and I have done almost everything to solve that but it does not work...

Just upgraded to braided steel lines on my 2016 yamaha r3 and so emptied out all the brake fluid and when topping up after reassembling everything the fluid just stays in the reservoir and won't go into the rest of the system. At best can only get one drop to come out into the top banjo after...