Yamaha R3 Forums banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
971 Posts
Or go to 1.5" riser clip-ons and mount them under the triple. You will have to remove the wiring looms mounted to the underside of the triple. As you have them now, you have about a half inch unsupported - you may not have any problems, but not ideal. A handlebar rotating or coming off under hard braking is no bueno. My first attempt, I did the same thing and opted for the risers instead - much more secure. See if you can exchange them - the bar will end up slightly lower (about an inch) than it is with your current set-up. 2.5" riser, the bar is near where you have it now.
 
1 - 1 of 1 Posts
Top