Yamaha R3 Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
761 Posts
Discussion Starter · #6 ·
Do I have to take off your the fairings and front to install ?
Nope! Remove both mirrors (4 screws) and set aside. Remove 4 phillips screws and set aside. Gently lift the fairings away from the windscreen and lift the windscreen up and out once you clear the tabs and holes. You do need to take care and look under the fairings to see whats going on before just yanking and breaking things.

Watch the rubber nuts and how they are placed in and below the shield for the 4 screws. Install is reverse.

That said, I am a very particular person and I took my time and my windshield change took me about 45 minutes including putting my tools away. This is because I like to take my time and study the components so I do not break things.

Here is another valuable thread on the "how to".

http://www.r3-forums.com/forum/385-...alled-powerbronze-dark-tint-screen-today.html
 

·
Super Moderator
Joined
·
1,309 Posts
Yeah there is a write-up on the web that makes it sound like you have to remove a bunch of things, but it's not the case actually. It's unfortunate that the one walk-through linked in the post above is not returned easily by Google ...
 
1 - 7 of 7 Posts
Top