Yamaha R3 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Hi all - I have a Competition Werkes fender eliminator turn signal bulb burned out... curious if anyone knows the bulb type? Want to get the replacement so I can fix it all at the same time. I contacted CW but have yet to get any response... scoured the interweb too... hoping someone here knows.
 

·
Super Moderator
Joined
·
1,348 Posts
If the turn signals use a standard bulb, the lens should be held on with a few screws. Remove the lens and you should be looking at the bulb. 10-minute job.
Most automotive stores will have the bulb in stock.
 

·
Registered
Joined
·
9 Posts
Discussion Starter · #3 ·
For anyone that has the Competition Werkes fender eliminator... the turn signal bulb is 12v 21w. The clear lenses pop off if u stick a tiny flathead screw driver in the notch... it takes a little pressure, but don't force it.
 
1 - 3 of 3 Posts
Top