Yamaha R3 Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 · (Edited)
So here is what went on the bike this weekend:
1. Solo Seat cowl
2. Yosh R3 slip on
3. Vagabond Fender Eliminator
4. TST front blinkers
5. Lower smoked windscreen
Had a great time installing them! Next weekend I will install the Blue levers, bar ends, Swing arm spools, front fork sliders, TST TechSpec Gripster Tank Grips and the Yamaha frame sliders didn't have the hart to drill 4 holes in her for the sliders this weekend.
0718151948.jpg
0718152337.jpg
0718152339.jpg
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #3 ·
It sound pretty good it has a little growl to it lol, its not as loud as the Akropovic but it dose the job.
 

·
Registered
Joined
·
121 Posts
5. Lower smoked windscreen
Hi,
Wondering where you found the windshield and how much lower it is. I find the stock one puts the blast right smack in the middle of my shield and is really noisy. If I lift my body up just a bit the wind goes under my helmet and its a lot quieter. This shield might fix that. Can you measure the length of it with a tape measure from the top of the center light to the top of the screen please? The stock one is 12 3/8" for comparison.

Marc
 

·
Registered
Joined
·
25 Posts
Discussion Starter · #5 ·
I got it from my dealer I bought my bike from barneysstpete.com for 59.99, The wind screen is 9" in the middle and 12" on the left and right sides it dips down at the top middle so its not straight across its shaped like a U at the top... if that makes sense.
 

·
Registered
Joined
·
121 Posts
I got it from my dealer I bought my bike from barneysstpete.com for 59.99, The wind screen is 9" in the middle and 12" on the left and right sides it dips down at the top middle so its not straight across its shaped like a U at the top... if that makes sense.
Is that measured from the top of the light? If it is then that might be perfect for me. Saw one on eBay for $49 delivered. Thanks for the help!

Marc
 
1 - 8 of 8 Posts
Top