Yamaha R3 Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Anyone have any suggestions on painting my kill switch and pass button? The previous owner left the bike in the sun quite a bit and both switches look pretty rough. I just want to re-paint to factory. Thanks
 

·
Super Moderator
Joined
·
1,381 Posts
If the plastic is faded, there isn't much you can do to permanently fix it other than replacing the switches. Putting any type of protectant on it or doing the old WD40 trick will help a bit in the short term but long term, not much you can really do.

What I would try, depending on how bad it is, try a bit of clear coat on it. That will give it a bit of shine at least.
 
1 - 3 of 3 Posts
Top