Yamaha R3 Forums banner

Front Fork Brace

1907 Views 2 Replies 2 Participants Last post by  FangShui
Made from 6061 Aluminum (Aluminium for those in UK, N.Z. and OZ).

I have one of these on my CB500X and it's nicely made and an easy install

http://www.ebay.com/itm/For-YAMAHA-...RK-/111690944426?_trksid=p2141725.m3641.l6368

View attachment 5449
1 - 3 of 3 Posts
Yeah, I saw those yesterday. They don't look very beefy. Their installation says that you remove your dust caps (protecting the oil seal), but never says to put them back on. In the pix, the dust cap appears to be in place though.
Yeah, I saw those yesterday. They don't look very beefy. Their installation says that you remove your dust caps (protecting the oil seal), but never says to put them back on. In the pix, the dust cap appears to be in place though.
On my CB500X it installed without removing dust caps. The outer pieces come off to install.

This is probably not stiff enough for Racing but should be adequate for Street Riding, I think/IMHO.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top