Yamaha R3 Forums banner

Glue Residue

1164 Views 2 Replies 3 Participants Last post by  FredR3
Hey guys so today I tried taking off the decals on my raven R3 and 2 of them came off perfectly but the other 2 left a lot of residue. What's the easiest way to take this off?
  • Like
Reactions: 1
1 - 3 of 3 Posts
WD40 works great and won't damage the finish
  • Like
Reactions: 1
Use a heat gun or a hair dryer if you don't have one to heat the residue. It'll make removing it much easier. You could also use rubbing alcohol to remove it after heating it. It works pretty well. Hope it helps.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top