Yamaha R3 Forums banner

Headlight housing

1160 Views 1 Reply 2 Participants Last post by  rito
Are the edges of the housing really not sealed im having problem with moisture and fog.

Sent from my iPhone using Tapatalk
1 - 2 of 2 Posts
I'm thinking that they should be, seeing that others heat the assembly up in an oven to separate lens from reflector. Maybe you should check the rear caps to make sure they are tightly closed. It should take a little effort to remove and a little more effort to tighten (lefty loosey, righty tighty).
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.