Yamaha R3 Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Struggling a little here.

I'm wanting the smoked flush turn signals up front and a relay to slow the signal speed

Obviously TST Industries do a kit but it's going to cost me 80+ dollars just to get it shipped to the UK,

Do any of you know any solutions to purchase a kit in the UK? Can't seem to find anything...

Not breaking my bank on such a trivial item.

Thanks in advanced
 

·
Registered
Joined
·
155 Posts
just go on ebay and look for some yamaha fit flush mount smoked turn signals and a relay should be about £10-£20 total at most i'd find the things you'd need for you but that takes the fun out of it all
 

·
Premium Member
Joined
·
2,264 Posts

·
Registered
Joined
·
29 Posts
I just installed the TST flush turn signal 2 nights ago.

Ive got a Australian delivered R3.

Didnt end up using their extra connector/harness or their relay flasher

Works fine just with the turn signals.
Plug and play.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top