Yamaha R3 Forums banner

LED Fairing Mirror Block-Off Signal Lights

1851 Views 0 Replies 1 Participant Last post by  FangShui
If you're removing your fairing mirrors and using Bar End Mirrors or mirrors mounted in the handlebars' existing mirror holes, these can be used instead of Mirror Blanking/Blockoff Plates.

They look like they're the same shape as the stock mirror base and large enough to completely cover the exposed area on the fairing cowl.

http://cdn.opentip.com/Sports-Outdo...ignalsmoke-p-3688784.html?ats=product_related

If you add in one of these you can run both the stock (or aftermarket) signals on the side fairings AND these signals at the same time.

http://www.motodynamic.com/yamaha/w...-r6-fz6-fz6r-fz1-fz8-fz07-fz09-fj09-pair.html
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top