Yamaha R3 Forums banner

Mirrors with indicators?

2285 Views 3 Replies 4 Participants Last post by  FangShui
I've fitted the flushmount indicators to my R3 and wanted to get some new mirrors fitted with indicators to make up for some lost visibility (and solve the mirror problem)

Has anyone seen suitable replacements?

P.S: no I wont get bar end mirrors or indicators, its specifically the above I need
1 - 4 of 4 Posts
Could try some stick on LED strips on your existing mirrors. A lot of the "universal" stuff out there is chinese junk, maybe someone else here knows of something that isn't crap.
A couple of years ago, we tried the cheap (~$30) Chinese LED-integrated mirrors on the GF's Ninja, and they were poor quality -- a lot of vibration on the mirror and poor visibility on the LED's. I would not recommend them to anyone. There are very few high quality such mirrors on the market, and they are expensive. Here is one:

Rizoma Veloce L

A couple of years ago, we tried the cheap (~$30) Chinese LED-integrated mirrors on the GF's Ninja, and they were poor quality -- a lot of vibration on the mirror and poor visibility on the LED's. I would not recommend them to anyone. There are very few high quality such mirrors on the market, and they are expensive. Here is one:

Rizoma Veloce L

http://www.youtube.com/watch?v=yVg_dC1r9Ok
Rizoma doesn't currently make adapters available for those Veloce L mirrors, which would be needed to mount them on the R3 fairing, or for their
Veloce Naked verison that would mount in the threaded mirror holes on the handlebar controls.

Don't hold your breath on that......They have a very limited adapter range. Their mirrors are VERY nice, though.

Most of the mirrors on eBay that have signals in them are either poor quality, too short, or both.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top