Yamaha R3 Forums banner

Standalone auxiliary light cover?

1644 Views 4 Replies 4 Participants Last post by  meeprawr
Does anyone know if I can purchase the auxiliary light cover by itself? All of the places I have called, and the parts guides I have checked online, only detail the entire headlight assembly which is about 5-6 parts altogether and it costs about $250aud.


I dropped my bike a few weeks ago, after target fixating on a corner going about 90km/h. I panicked, locked my arms and ended up in some bushes. Surprisingly nothing was seriously damaged, my auxiliary light cover cracked, and my left indicator fell out, but that was easily pushed back in. There were some very light scratches on my fairings, but no other major issues.


I'm trying to fix up my bike now, and this light cover is the last thing that needs care, but all of the places I've contacted say that I have to purchase the entire assembly? This seems a bit over the top considering nothing else in the front is damaged (my actual headlines are still perfect without a scratch). Has anyone else had a similar experience?
1 - 5 of 5 Posts
This has been brought up recently. You are correct its sold as part of the entire headlight assembly. Contact Yamaha USA and see if they will list it as a separate part.
another option is Could always get upgraded halo set for a bit more

Sent from my R7plusf using Tapatalk
The auxiliary light cover comes with the whole OEM headlight unit, not possible to order separately.
For a little bit more you can buy a HID projector headlight (comes pre-installed with OEM headlight unit)
http://anunaki-parts.com/en/yamaha-r3-mt-03/38-hid-projector-yamaha-r3-mt-03.html
BONUS: we can change the auxiliary light: white, red, purple, blue or green :)
This has been brought up recently. You are correct its sold as part of the entire headlight assembly. Contact Yamaha USA and see if they will list it as a separate part.
I only posted/asked because Yamaha AU haven't responded to me, local dealers only sell the entire assembly, and searching 'auxiliary' brings up 0 relevant results to the part in question.

I was hoping to see if anyone had similar experiences sourcing and replacing the cover... it just seems like a very strange part to crack considering the rest of my front assembly is perfect.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top