Yamaha R3 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter · #1 · (Edited)
was installing flush mount turn signals and went to see if they worked before i put everything back together, turned the bike on, didnt properly secure the wires and they touched making a clicking sound, at that moment everything i listed in the title shut off and stopped working, what do i need to replace in order to fix this?

i opened up the fuse box, im looking through the manual now, not sure which fuse(s) i need to replace

found it, now the question is what kind of fuse do I need to buy?

fount it, 15.0 A fuse

Woo solved it myself guys!
 

·
Premium Member
Joined
·
2,264 Posts
was installing flush mount turn signals and went to see if they worked before i put everything back together, turned the bike on, didnt properly secure the wires and they touched making a clicking sound, at that moment everything i listed in the title shut off and stopped working, what do i need to replace in order to fix this?

i opened up the fuse box, im looking through the manual now, not sure which fuse(s) i need to replace

found it, now the question is what kind of fuse do I need to buy?

fount it, 15.0 A fuse

Woo solved it myself guys!
Problem, Diagnosed, Fixed. Boom! :)
 

·
Registered
Joined
·
717 Posts
Good job, Anthony!!! Electrical click will almost always be a relay or fuse.
 
1 - 5 of 5 Posts
Top