[beau_bygrace116]

Hey everyone,

Earlier today I removed my right side fairing by following the well laid out and detailed instructions on http://www.yamahar3racing.com/2015/05/how-to-remove-the-side-fairings-from-the-yamaha-r3/. I successfully put everything back and lo and behold i find this piece chillin on the bottom on the bike. It must of dropped and due to it being rubber I didn't hear it. Can anyone pinpoint this piece. Looks to be a grommet of some sort. I am looking through the Yamaha R3 parts schematic and haven't figure it out yet.

Thanks

 

[Bird]

Bottom rear bushing from the side z fairing.

http://www.procaliber.com/oemparts/a/yam/54fdc94e87a86510e821036f/cowling-1

Part 39 and 40.

 

[FangShui]

Definitely looks like a grommet from fairing or side cover.

These get pushed out the back sometimes when installing the plastics.

 

[beau_bygrace116]

Bottom rear bushing from the side z fairing.

http://www.procaliber.com/oemparts/a/yam/54fdc94e87a86510e821036f/cowling-1

Part 39 and 40.

Same part but that location is still intact. I found it laying more towards the front so its probably something that uses the same part. You've given me an idea of what to look for!! THANK YOU!!

 

[Bird]

18 and 20
24 and 26
appear to be the same too

 

[Stirz]

They're used on both the body panels and the frame (same bushing) - and the tank as well. Go through what you removed and you should be able to find where it goes.

 

[beau_bygrace116]

They're used on both the body panels and the frame (same bushing) - and the tank as well. Go through what you removed and you should be able to find where it goes.

Yeah I'm on it! Getting warmer I think lol.

 

[Stirz]

Yeah I'm on it! Getting warmer I think lol.

After another look, I see these are the ones with the steel bushings, not the plain rubber ones (my bad). These go just below the seat on the frame and mount side panel, I believe. A screw passes through the panel, through the bushing into a threaded nut as I recall.


Bird nailed it, I think 24&26:


http://www.partzilla.com/parts/search/Yamaha/Motorcycle/2015/YZFR3+-+YZFR3FR/COWLING+1/parts.html

 

[beau_bygrace116]

Thank You!

18 and 20
24 and 26
appear to be the same too

Yessir! Looks to be 24 and 26! Greatly appreciate the help!

 

[beau_bygrace116]

After another look, I see these are the ones with the steel bushings, not the plain rubber ones (my bad). These go just below the seat on the frame and mount side panel, I believe. A screw passes through the panel, through the bushing into a threaded nut as I recall.


Bird nailed it, I think 24&26:


http://www.partzilla.com/parts/search/Yamaha/Motorcycle/2015/YZFR3+-+YZFR3FR/COWLING+1/parts.html

Yup! 24 and 26!!