Yamaha R3 Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
Hey guys I have an r3 and it is so hard to find stuff for it because it is so new still. Does anyone know if r6 accessories such as flush mount signal lights work on my r3? Instead of having to use universal stuff all the time ? Or can any yamaha parts match all yamahas (sorry for the noob questions) I'm a beginner rider and I eventually want to start modding my baby I can't wait to get rid of those ugly signal lights lol. Helppp please!
 

·
Registered
Joined
·
161 Posts
For flush turn signals go to:
https://tstindustries.com/Yamaha-YZF-R3-2015/

As far as stuff like levers search eBay for now. If you got that route avoid the seller halfoxstore (can't remember exact name but that's close) he advertises part that fit but don't. Mine didn't from him.

I think parts that for r25 will fit and I'm sure more knowledgeable members such as FangShui will chime in. Enjoy the ride!
 

·
Registered
Joined
·
74 Posts
I'm wondering the same thing. I would like to know if the Graves bar end with mirror adaptor for r6 would fit the r3. I like that it just screws in without having to remove the bar weight.
 

·
Premium Member
Joined
·
2,264 Posts
Graves Bar Ends for R3

I'm wondering the same thing. I would like to know if the Graves bar end with mirror adaptor for r6 would fit the r3. I like that it just screws in without having to remove the bar weight.
Based on the fact that the TST Industries Bar Ends (part # KTA-Y1BK) fit ALL years R1s and ALL years R6s AND the R3 ( I have them on mine) I'm going to say that, yes, the Graves bar ends and mirror adapters for the R6 will fit the R3.

It appears that all SuperSport Yamaha's have the same bar weight inside the handlebars with the same thread size. The Graves kit should have the screw that fits all these bikes. It looks like the mirror adapters just come with a longer screw.

Should be easy enough to verify with a phone call or email to Graves....
 

·
Premium Member
Joined
·
2,264 Posts
Hey guys I have an r3 and it is so hard to find stuff for it because it is so new still. Does anyone know if r6 accessories such as flush mount signal lights work on my r3? Instead of having to use universal stuff all the time ? Or can any yamaha parts match all Yamahas (sorry for the noob questions) I'm a beginner rider and I eventually want to start modding my baby I can't wait to get rid of those ugly signal lights lol. Helppp please!
+1 from me on the TST flush signals. They're cheap ($13.99), very easy to install and look great.

Be sure to also buy the Signal Plug Converters. This makes the signals Plug and Play and they only cost $5.99. Option to add them is on the signals order page.

You can also buy the 2 PIN LED FLASHER RELAY GEN 2 for $18.50 and then the LED signals will flash at the normal 85 flashes per minute (or you can set any speed you like), The relay is also Plug and Play, a 5 minute install.

All together, the setup costs $38.48 plus shipping.

Install videos:

Signals https://www.youtube.com/watch?v=89jDw2WRZ5I

Relay https://www.youtube.com/watch?v=fORoeUcRUHE

TST Halo-1 signals will be available end of Summer 2015
 

·
Registered
Joined
·
18 Posts
Will the R6 Throttle Tube & Throttle Housing fit on my R3? I was planning on getting Vortex 7 degree drop clipons and place them under the triple clamp. and to get the fairing clearance, I was gonna buy Motion pro Start kill switch and the R6 throttle tube with housing that is on Ebay for 26$. Just need to know if the Tube and the housing fits.
 

·
Registered
Joined
·
2,517 Posts
What do you mean by the housing? The part where the tube fits with the 2 cables? Not sure about that, but dont see why it wouldnt. The tube itself fits, I have an R6 tube on my bike, and a few members here do as well.
 

·
Registered
Joined
·
2 Posts
Hey do you know if the front foot pegs from an R6 will fit an R3? My right side snapped in half and I need a replacement ASAP and the only one I have readily available is from an R6. :(
 

·
Premium Member
Joined
·
971 Posts
Hey do you know if the front foot pegs from an R6 will fit an R3? My right side snapped in half and I need a replacement ASAP and the only one I have readily available is from an R6. :(
The pegs for the R3 and R6 are different part numbers - seems like if you have some R6 pegs readily available it wouldn't take much to see if they fit.
 

·
Registered
Joined
·
18 Posts
What do you mean by the housing? The part where the tube fits with the 2 cables? Not sure about that, but dont see why it wouldnt. The tube itself fits, I have an R6 tube on my bike, and a few members here do as well.
Well by housing I meant this entire assly with the clamp.

http://tinyurl.com/R6Housing

http://tinyurl.com/R6ThrottleAssly

Will it fit the R3's 22.2 mm dia clip on bar? Since I plan on moving my stock clip ons below the triple clamp and I need this to get fairing and dash clearance .
 

·
Registered
Joined
·
19 Posts
Well by housing I meant this entire assly with the clamp.

http://tinyurl.com/R6Housing

http://tinyurl.com/R6ThrottleAssly

Will it fit the R3's 22.2 mm dia clip on bar? Since I plan on moving my stock clip ons below the triple clamp and I need this to get fairing and dash clearance .
It should. I installed woodcraft clip-ons for my R6 and the diameter on the bars are 22.2mm. The throttle assembly you linked went on perfectly.

And the R6 throttle tube is definitely recommended for the R3.
 
1 - 13 of 13 Posts
Top