Yamaha R3 Forums banner

WTB: pigtails from stock turn signals

1156 Views 2 Replies 2 Participants Last post by  Capitalview
Looking for a set of pigtails off of the stock REAR turn signals if anyone has them. Only the right side is really needed.

Do need the connector as well as a good amount of wire attached. If anyone has done a fender eliminator and has these lying around, please let me know, thanks!
1 - 3 of 3 Posts
Or if it's easier, the whole stock rear turn signal itself with the wire works too.
I would do $45 shipped to you for both signals. They are undamaged and only have 144 miles on them though, hence the price...
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.