Hello everyone! I have searched for info on quad lock phone mount install for 2024 R3, without a lot of luck on actual specs for the screw and spacer. So here is what I did. I hope it can help someone else out. (I have an IPhone 15 pro max for phone size reference)
I used this screw area in the triple tree, (left of the ignition for more space)
![Image]()
This screw is M6 1.0 threading.
I bought these items from Quad Lock
![Image]()
I needed a spacer since the area is not level on left side. I used a rubber rubber grommet and trimmed it down on one side to make a level space. (got at Lowes)
![Image]()
![Image]()
I needed a longer screw to accommodate the spacer and extension arm. I got this M6 1.0 - 30mm long. (From Lowes)
![Image]()
I put all the pieces together and attached to bike. Done!
![Image]()
This is sitting on bike looking down, no obstruction of gauge cluster and does not hit tank turning handlebar side to side.
![Image]()
I used this screw area in the triple tree, (left of the ignition for more space)
This screw is M6 1.0 threading.
I bought these items from Quad Lock
I needed a spacer since the area is not level on left side. I used a rubber rubber grommet and trimmed it down on one side to make a level space. (got at Lowes)
I needed a longer screw to accommodate the spacer and extension arm. I got this M6 1.0 - 30mm long. (From Lowes)
I put all the pieces together and attached to bike. Done!
This is sitting on bike looking down, no obstruction of gauge cluster and does not hit tank turning handlebar side to side.
